CNV Series

cnvseries_newhead cnv_t1b2
Fabric Features
●Last-long Flatness

With four layer structure including Fiberglass, Stretchness less than 1% which ensures the last-long flatness

●Sophisticated Images

Engraved with optical microgroove on the surface, with resolution more than 125 line pairs per mm,
which ensures the sharpness of the projected images

●Color Accuracy

The reflection light are evenly distributed with less than 60K difference between incident angle and reflection angle

●Wide Color Range

With high contrast processment, while maintaining the color accuracy and color range is widely presented to provided
a more vivid image


Fabric Types
cnv_t1aa
CNV Motorized Screen

● In-line Switch

The In-line Switch, operating convenient and high steady features.






● Optional Controls
cnv_t2b
Optional External Remote Control System



● External RF Remote Control sets

* The control distance can be 25 meters, no direction restraints.
* The motor is equipped with a "delayed action"and "1 minute disconnected" mechanism.
* Button control design with "up" "stop" "down" function.
* Micro-adjustment function design.
* Ultra low power consumption, energy saving.
* With learning function and universal design, the remote controller can be easily replaced even lost.

● External IR Remote Control sets

* The control distance is 8 meters, control range is +-60 degrees.
* The motor is equipped with a "delayed action"and "1 minute-disconnected" mechanism.
* Preferred encoding combination, with anti-jamming design.
* Button control design with "up" "stop" "down" function.
* Micro-adjustment function design.
* Ultra low power consumption, energy saving.
* With Manual control design, easy to use.
CNV Integrated Motorized Screen
● IR Remote Control

The fabric adjustment and micro control can be achieved by remote controller set, the remote distance is 8m.

cnv_t2a
● Multi-Control Options

1 2 3

IR Remote Control
The fabric adjustment and micro control can be achieved by remote controller set, the remote distance is 8m.

Intelligent control interface

Wall Switch (optional)
Plug into the EXTCTCRL slot of the screen via a 6P6C cable to carry out Wall-switch control function. Various cable lengths can be used for different installation situation.



4
Intelligent Control Options
With 3~12V trigger input, external IR sensor input, dry-contact control, RS485 control.
cnv_t3d

Multi-Functional Mounting Bracket (Ceiling mount/Wall mount)
Optional installation functions in wall mounted, ceiling mounted or ceiling suspended. Installing with tightening screws to keep the screen locked and secured.
cnv_t5full
Standard Accessories
Motorized Screen Integrated Motorized Screen
cnv_t6d cnv_t6b cnv_t6c cnv_t6d
Mount Bracket Mount Bracket Infrared Receiver Infrared Remote Control
Optional Accessories for Intelligent Motorized Screen
Power Relay
The emitter is installed at the projector end and the receiver is connected to the "EXT IR" plug on the screen, when the projector is triggered on/off the screen would open/close automatically
 cnv_t6a
RS485 Wall Switch
RS485 Wall Switch is an external screen controller, integrated with RS485 and USB interface, it can be connected to the "EXT CTRL" slot on the screen end to control the screen
Specification
(Intelligent Motorized Screen CN-MIxxx, In-line Switch Motorized Screen CN-Mxxx)
Format Specification
(inch)
Viewing Area(WxH) A B3 Casing Size
(LxHxW)
End Cap Net Weight
(Kg)
Power
(voltage220v)
4:3 84 1710×1280 1495 80 1977×79×78 B 11.5 115W
100 2030×1524 1735 80 2281×79×78 B 12.4 115W
120 2400×1800 1970 80 2585×79×78 B 14.5 115W
150 3050×2286 2566 80 3342×113×113 A 24.0 115W

16:9 92 2030×1145 1930 650 2281×79×78 B 12.6 115W
100 2214×1245 1930 550 2465×79×78 B 13.2 115W
106 2340×1320 1955 500 2585×79×78 B 14.5 115W
120 2656×1494 2094 400 2948×113×113 A 20.6 115W
Note:
1. Unremarked measurements are default to be MM.
2. Side borders of B1 are both 50mm.
3. The bottom black drop for Type A of Motorized screen is 80mm (B2); the bottom black drop for Type B of Motorized screen is 50mm (B2).
4. For recess-ceiling installation design, the length / width / height of the groove need to be added by 100mm / 60mm / 60mm respectively.
5. Above parameters could be changed due to product improvement.
2D-View
tablechat1

End Cap View
tablechat2