Control System

CONTROL SYSTEM
REMOTE CONTROL OPTION

RF Control(GF-08)

Available for SkyShow Motorized Screens

RF Control(GF-16)

Available for Crystal Motorized Screens with Built-In RF Motor

RF Control(GF-123)

Available for SkyShow Motorized Screens

RF Control (GF-17)

Available for Legacy / Fancy / Hightech / etc. Motorized Screens

IR Control(GR-127)

Available for All Built-in IR Smart Motorized Screens - Cyber/Fantasy/Recessed/CNV/DIAS, etc.

IR Control(GR-17)

Available for Legacy / Fancy / Hidetech / etc. Motorized Screens

RF Control (DF-17)

Available for Legacy / Fancy / Hidetech / etc. Motorized Screens

RF Control(GF-18)

Available for Crystal By Grandview (Synchronized motor)

CONTROL SYSTEM
EXTERNAL CONTROL OPTION


External RF Control Box(FM 868Mhz)


Item code : 1GD-868M
Power : DC3V (with AAA X 2 batteries

RF Remote Control


Item Code : GR-06
Power : AC220V / 50HZ AC110V / 60HZ

External RF Control System

With the FM wireless system, the controllable distance is up to approximately 25 meters. The receiver box is equipped with a "delay function" and "1 minute disconnect" mechanism which helps protect the motor. Users can also easily control the screen on the receiver box itself. The IC inside the receiver box can store up to one million groups of codes and the utilization of "rolling codes" can prevent conflicts. With these features and extensive range, the installation is easy and provides many options. In the event the receiver is accidently lost, it can be replaced with a new unit and paired again with the remote control.


RF Wireless Trigger(12V-WF)

Simply plug the wireless trigger into the "TRIGGER" slot of the projector and the wireless RF-IR converter into the screen to create a synchronized control system. When the projector is turned on, the projection screen will automatically lower. When the projector is turned off, the projection screen will automatically retract.

External IR Control Box (FM 868Mhz)


Item Code : 1GD-1Ra
Power : DC3V(With AAA X 2 batteries)

IR Remote Control


Item Code: GR-08
Power : AC220V / 50HZ AC110V / 60HZ

External IR Control System

With the IR control system, the maximum controllable distance is up to 12 meters at +- 30 degrees. The receiver box is equipped with a "delay function" and "2 minute disconnect" mechanism which can protect the motor. It also features multi-control options such RS-485, RS-232 and dry contact. The IR Control has an up and down micro adjustment function making the screen control easier than ever.


Power Synchro Relay

Connect the Power Synchro Relay to the power cord of the projector and the RF-IR converter to the screen to create a synchronized control system. The Power Synchro Relay is designed for projectors that do not have trigger outputs. It detects the power current of the projector and transmits a wireless signal to the receiver. When the projector is turned on, the projection screen will automatically lower. When the projector is turned off, the projection screen will automatically retract.

CONTROL SYSTEM
INTEGRATED CONTROL OPTION

Control Interface ( 1st Generation)


Available for CNV A casing, Fantasy B casing, Cyber A casing

Control Interface(2nd Generation)


Available for DIAS A / B casing, Cyber A / B casing, Fantasy A / B casing,

IP Control Interface(3rd Generation)


Available for Cyber A / B casing

In-Line Switch


● Standard Voltage Control
● Default control option included with standard motorized screens

Wall Switch


● Low Voltage Control
● Comes with a RS232 USB port - connect to the "EXT CTRL" slot of the Integrated motorized screen to control

Smart Wall Switch


● Low Voltage Control
● Comes with a RS232 USB port - connect to the "EXT CTRL" slot of the Integrated motorized screen to control

Wall Switch for Skyshow


● Low Voltage Control
● Connect to the "EXT CTRL" slot of SkyShow screen to control