Manual Screen

Reproducing Genuine Colors
cyber_newhead

lrage1

Fabric Features
● Last-long Flatness

With four layer structure including Fiberglass, Stretchness less than 1% which ensures the last-long flatness

● Sophisticated Images

Engraved with optical microgroove on the surface, with resolution more than 125 line pairs per mm, which ensures the sharpness of the projected images

● Color Accuracy

The reflection light are evenly distributed with less than 60K difference between incident angle and reflection angle

● Wide Color Range

With high contrast processment, while maintaining the color accuracy and color range is widely presented to provided a more vivid image

cyber_l1

c1new

Cyber Manual Screen with Speed Reduction

c2new
● Limitless Positioning

With Limitness Positioning Structure, the screen can be stopped by holding the handle for 3 seconds at any position.

spic1
Pull Down the Screen Hold for 3 seconds Lock
● Slow Retraction

With Slow Retraction System to allow the screen retracting back slowly within 8 seconds, which can prevent the safety issue cause by lower bar hitting casing.

spic2

Evenly retract in 8 seconds

● Wrinkle Free

When the screen is fully retracted the positioning system is lock off and the fabric is not stretched by the spring system, which can prevent the wrinkle cause by long time stretchness from the spring system.

spic3

Last long flatness

Standard Accessories

Manual Screen
col3pic2

Universal Bracket

Suitable for either wall mount, ceiling mount or ceiling hang. The bracket can slide horizontally at the back of the casing to match different installation positions.



Wall Mount

Ceiling Mount

cyber_new1

Ceiling Hang

cyber_new2

Floating Bracket

cyber_new3

Fasten Screw

cyber_new4
Specification
Driving System Format Specification(inch) Viewing Area(WxH) A B3 Casing Size
(LxHxW)
Net Weight(Kg)
Manual Screen
CB-Pxxx
4:3 72 1460×1100 1319 80 1584×82×71 6.5
84 1710×1280 1499 80 1864×82×71 8.1
100 2030×1520 1747 80 2204×85×79 10.5
120 2340×1755 1998 80 2509×100×90 13.8
150 2817×2110 2350 50 2992×100×90 19.6

16:9 70 1550×871 1760 750 1725×82×71 7.1
80 1770×996 1789 650 1901×82×71 8.4
92 2030×1145 1812 500 2204×85×79 10.5
100 2214×1245 1908 500 2389×100×90 12.7
106 2340×1320 1983 500 2509×100×90 13.8
120 2656×1494 2054 400 2830×100×90 16.2
Note:
1. Unremarked measurements are default to be MM.
2. Side borders B1 are both 50mm.
3. For recess-ceiling installation design,the length/width/heigth of the groove need to be added by 100mm/60mm/60mm respectively.
4. Above parameters could be changed due to product improvement.
2D-View

table_img1

End Cap View

bcd